收藏本站
15
LTC2239
2239fa
APPLICATIO S I FOR ATIO
WU
UU
Input Range
The input range can be set based on the application. The
2V input range will provide the best signal-to-noise perfor-
mance while maintaining excellent SFDR. The 1V input
range will have better SFDR performance, but the SNR will
degrade by 0.7dB.
Driving the Clock Input
The CLK input can be driven directly with a CMOS or TTL
level signal. A sinusoidal clock can also be used along with
a low-jitter squaring circuit before the CLK pin (see
Figure 11).
The noise performance of the LTC2239 can depend on the
clock signal quality as much as on the analog input. Any
noise present on the clock signal will result in additional
aperture jitter that will be RMS summed with the inherent
ADC aperture jitter.
In applications where jitter is critical, such as when digitiz-
ing high input frequencies, use as large an amplitude as
possible. Also, if the ADC is clocked with a sinusoidal
signal, filter the CLK signal to reduce wideband noise and
distortion products generated by the source.
The 1.5V bandgap reference serves two functions: its
output provides a DC bias point for setting the common
mode voltage of any external input circuitry; additionally,
the reference is used with a difference amplifier to gener-
ate the differential reference levels needed by the internal
ADC circuitry. An external bypass capacitor is required for
the 1.5V reference output, VCM. This provides a high
frequency low impedance path to ground for internal and
external circuitry.
The difference amplifier generates the high and low refer-
ence for the ADC. High speed switching circuits are
connected to these outputs and they must be externally
bypassed. Each output has two pins. The multiple output
pins are needed to reduce package inductance. Bypass
capacitors must be connected as shown in Figure 9.
Other voltage ranges in-between the pin selectable ranges
can be programmed with two external resistors as shown
in Figure 10. An external reference can be used by applying
its output directly or through a resistor divider to SENSE.
It is not recommended to drive the SENSE pin with a logic
device. The SENSE pin should be tied to the appropriate
level as close to the converter as possible. If the SENSE pin
is driven externally, it should be bypassed to ground as
close to the device as possible with a 1
F ceramic capacitor.
VCM
SENSE
1.5V
0.75V
2.2
F
12k
1
F
12k
2239 F10
LTC2239
Figure 10. 1.5V Range ADC
CLK
50
0.1
F
0.1
F
4.7
F
1k
FERRITE
BEAD
CLEAN
SUPPLY
SINUSOIDAL
CLOCK
INPUT
2239 F11
NC7SVU04
LTC2239
Figure 11. Sinusoidal Single-Ended CLK Drive
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
LTC2240CUP-12#PBF IC ADC 12BIT 170MSPS 64-QFN
LTC2240IUP-10#PBF IC ADC 10BIT 170MSPS 64-QFN
LTC2241IUP-10#PBF IC ADC 10BIT 210MSPS 64-QFN
LTC2242IUP-10#PBF IC ADC 10BIT 250MSPS 64-QFN
LTC2245IUH#TRPBF IC ADC 14BIT 10MSPS 3V 32-QFN
LTC2249IUH#TRPBF IC ADC 14BIT 80MSPS LP 32-QFN
LTC2251IUH#PBF IC ADC 10-BIT 125MSPS 3V 32-QFN
LTC2253IUH#TRPBF IC ADC 12BIT 125MSPS 3V 32-QFN
相关代理商/技术参数
LTC2239CUH#TRPBF 功能描述:IC ADC 10BIT 80MSPS 3V 32-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极
LTC2239IUH 制造商:LINER 制造商全称:Linear Technology 功能描述:10-Bit, 80Msps Low Noise 3V ADC
LTC2239IUH#PBF 功能描述:IC ADC 10-BIT 80MSPS 3V 32-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极
LTC2239IUH#TRPBF 功能描述:IC ADC 10BIT 80MSPS 3V 32-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极
LTC2240-10 制造商:LINER 制造商全称:Linear Technology 功能描述:14-Bit 250Msps/ 210Msps/170Msps ADCs
LTC2240-12 制造商:LINER 制造商全称:Linear Technology 功能描述:14-Bit 250Msps/ 210Msps/170Msps ADCs
LTC2240CUP-10 制造商:LINER 制造商全称:Linear Technology 功能描述:10-Bit, 170Msps ADC
LTC2240CUP-10#PBF 功能描述:IC ADC 10BIT 170MSPS 64-QFN RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极